HLSL-Related Enable Switches
----------------------------

Name                    Values		Description
hlsl_enable             0/1             Enables HLSL post-processing in Direct3D 9 modes.
yiq_enable              0/1             Enables YIQ-colorspace post-processing. Causes a
                                        performance drop but gives a much more authentic
                                        NTSC TV appearance on TV-based systems when configured
                                        properly.
hlslpath                [path]          Path to the .fx files that are in use.  (default: hlsl)
hlsl_prescale_x         [horizontal]    HLSL pre-scale override factor for X.  (0 for auto)
hlsl_prescale_y         [vertical]      HLSL pre-scale override factor for Y.  (0 for auto)
hlsl_preset             -1 through 3    HLSL preset to use.  (default: -1)
hlsl_write              [filename]      Enable HLSL AVI writing.   (huge disk bandwidth suggested)
hlsl_snap_width         [width]         HLSL upscaled-snapshot width.  (default: 2048)
hlsl_snap_height    	[height]        HLSL upscaled-snapshot height.  (default: 1536)


Surface/Color Processing Parameters
-----------------------------------

Name                    Values		Description
shadow_mask_alpha       0.0 to 1.0      The ovearll darkness of each shadow mask pixel.
shadow_mask_texture     [filename]      A PNG that defines the shadow mask for each pixel.
shadow_mask_x_count     1+              The count of shadow mask elements, X (usually 640-ish).
shadow_mask_y_count     1+              The count of shadow mask elements, Y (usually 480-ish).
shadow_mask_usize       0.0 to 1.0      These parameters define the *in-use* pixel count on the
shadow_mask_vsize       0.0 to 1.0      X and Y axes of the shadow mask texture.
curvature               0.0 to 1.0      Screen curvature. Affects borders and shadow mask.
pincushion              0.0 to 1.0      Image curvature. Affects the source image only.
scanline_alpha          0.0 to 1.0      The overall darkness of each scanline furrow.
scanline_size           0.0 to 4.0      The overall height of each scanline.
scanline_height         [height]        Individual height scaling value for scanlines.
scanline_bright_scale   0.0 to 2.0      The overall brightness multiplier for each scanline.
scanline_bright_offset  0.0 to 1.0      The overall brightness additive value for each scanline.
scanline_jitter         0.0 to 2.0      The relative scanline movement per field.
defocus                 [xval,yval]     This defines the overall defocus radius for the three
                                        post-converged beams.  Values allowed range from 0.0 to
                                        32.0.
converge_x              [r,g,b]         Convergence in screen-relative X direction.
converge_y              [r,g,b]         Convergence in screen-relative Y direction.
radial_converge_x   	[r,g,b]         Radial convergence in screen-relative X direction.
radial_converge_y   	[r,g,b]         Radial convergence in screen-relative Y direction.
                                        Allowed values for convergence: -150 to 150 for each color.
red_ratio               [r,g,b]         These parameters define a 3x3 matrix which is multiplied
grn_ratio               [r,g,b]         by the incoming RGB signal. This can be used for any
blu_ratio               [r,g,b]         standard matrix convolution, including H/S/V or simply
                                        affecting the TV-style tint.
saturation              0.0 to 4.0      This parameter defines the amount each color channel is
                                        raised above said channel's baseline grayscale value.
                                        A value of 0.0 gives a gamma-correct grayscale image,
                                        whereas 1.0 is full saturation, with each channel being
                                        oversaturated equally beyond that.
offset                  [r,g,b]         These parameters define a value for each color channel
                                        that is added to said channel after scaling and after
                                        matrix convolution. (-2.0 to 2.0)
scale                   [r,g,b]         These parameters define a value for each color channel
                                        that is multiplied with said channel after matrix
                                        convolution.  (-2.0 to 2.0)
power                   [r,g,b]         These parameters define the exponent for each color
                                        channel that is applied after scaling, offsetting,
                                        saturation and matrix convolution. (-4.0 to 4.0)
floor                   [r,g,b]         These parameters define the lower limit of each final
                                        color channel value; 0.05, for example, raises the
                                        minimum to 0.05 but re-scales to leave the max at 1.0.
phosphor_life           [r,g,b]         These parameters define the phosphor lifetime for each
                                        channel, with 0.0 representing no phosphorescence and
                                        1.0 leaving the channel on indefinitely. Values allowed
                                        range from 0.0 to 1.0.


NTSC Processing Parameters
--------------------------

Name                    Default Values  Description
yiq_cc                  3.59754545      Color Carrier frequency for NTSC signal processing.
yiq_a                   0.5             A value for NTSC signal processing.
yiq_b                   0.5             B value for NTSC signal processing.
yiq_o                   0.0             Outgoing Color Carrier phase offset for NTSC signal processing.
yiq_p                   1.0             Incoming Pixel Clock scaling value for NTSC signal processing.
yiq_n                   1.0             Y filter notch width for NTSC signal processing.
yiq_y                   6.0             Y filter cutoff frequency for NTSC signal processing.
yiq_i                   1.2             I filter cutoff frequency for NTSC signal processing.
yiq_q                   0.6             Q filter cutoff frequency for NTSC signal processing.
yiq_scan_time           52.6            Horizontal scanline duration for NTSC signal processing. (usec)
yiq_phase_count         2               Phase Count value for NTSC signal processing. (3 for NES, else 2)


Vector Post-Processing Options
------------------------------
Name                    Default Values  Description
vector_length_scale     0.8             How much length affects vector fade.  (0.00-1.00)
vector_length_ratio     500.0           Vector fade length (4.0 - vectors fade the most at and above 4
                                        pixels, etc.)  (0.000 - 1000.000)


Bloom Post-Processing Options
-----------------------------
Name                    Default Values  Description
vector_bloom_scale      0.300           Intensity factor for vector bloom.  (0.000-1.000)
raster_bloom_scale      0.225           Intensity factor for raster bloom.  (0.000-1.000)
bloom_lvl0_weight       1.00            Bloom level 0  (full-size target) weight.  (0.00-1.00)
bloom_lvl1_weight       0.21            Bloom level 1  (half-size target) weight.  (0.00-1.00)
bloom_lvl2_weight       0.19            Bloom level 2  (quarter-size target) weight.  (0.00-1.00)
bloom_lvl3_weight       0.17            Bloom level 3  (.) weight.  (0.00-1.00)
bloom_lvl4_weight       0.14            Bloom level 4  (.) weight.  (0.00-1.00)
bloom_lvl5_weight       0.14            Bloom level 5  (.) weight.  (0.00-1.00)
bloom_lvl6_weight       0.13            Bloom level 6  (.) weight.  (0.00-1.00)
bloom_lvl7_weight       0.12            Bloom level 7  (.) weight.  (0.00-1.00)
bloom_lvl8_weight       0.11            Bloom level 8  (.) weight.  (0.00-1.00)
bloom_lvl9_weight       0.10            Bloom level 9  (.) weight.  (0.00-1.00)
bloom_lvl10_weight      0.09            Bloom level 10 (1x1 target) weight.  (0.00-1.00)
